½ñÈÕ³Ô¹Ï51

Here’s a roundup of exciting devices that have been recently added to the Assistive Device library:

Single Row Playing Cards Holder

The Single Row Playing Cards Holder is an assistive device for holding playing cards. This fully 3D-printed device aims to assist those with limited hand dexterity by giving them an alternate means of holding their playing cards. Users can place their cards into the tabletop holder which will discreetly display their cards during gameplay.

Costing less than a dollar in filament, this device is intended to be used with standard sized playing cards. Larger cards can be used but will decrease the maximum number of cards that can be held. Approximately 20 cards can be placed in the holding slot to be displayed.

There is also a Multi Row Playing Cards Holder version available.

Attribution: Design by licensed under ; Documentation by ½ñÈÕ³Ô¹Ï51/Makers Making Change

Learn more about the

One-Handed Xbox One Controller Modification

This inexpensive 3D printed modification for the Xbox One controller will allow for the user to operate their Xbox One controller with one hand. This controller adaptation makes it easier for someone who may have a difficult time holding a controller with both hands, or has greater dexterity with one hand than the other. This design is available in both a left-handed and right-handed version.

Attribution: Designed and Remixed from the Ìý²ú²â:Ìý; Released under Creative Commons Attribution-Noncommercial-ShareAlike 4.0 International license

Learn more about the

Round Touch 60 Switch

The Round Touch 60 Switch can control 3.5mm audio outputs like in the Xbox Adaptive Controller and other switch adapted products. This device may help users with limited hand strength and dexterity who find it challenging to trigger mechanical switches.

To use this device, plug in the power supply and connect the mono cable to a switch-controlled device. Simply touch the top surface to engage the switch, indicated by a red LED.

Attribution: Design by Jeffrey Ebin; Documentation by ½ñÈÕ³Ô¹Ï51/Makers Making Change

Learn more about the

Rocket Switch Interface

The Rocket Switch Interface is a USB switch interface device which enables users to operate their computer or smartphone devices using assistive switches. Up to two assistive switches with 3.5 mm connections can be used. When a connected assistive switch is activated, a keystroke or mouse click will be generated depending on the operating mode. The Rocket Switch Interface can operate in three different modes, and has an adjustable reaction time.

Attribution: Designed by Makers Making Change (Designer: Milad Hajihassan; Contributor: Derrick Andrews)

Learn more about the

This post originally appeared on the Ìý·É±ð²ú²õ¾±³Ù±ð.